Left Engine Mount Bracket - DDCT

REMOVAL 

1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
2. Disconnect and isolate the negative battery cable.
3. Remove the left engine mount insulator. Refer to INSULATOR, ENGINE MOUNT, LEFT, REMOVAL AND INSTALLATION  .

   Courtesy of CHRYSLER GROUP, LLC

4. Remove the bolts (1a) and left engine mount bracket (1b).

INSTALLATION 

1. Install the left engine mount bracket and tighten the bolts to the proper torque specification. Refer to TORQUE SPECIFICATIONS  .
2. Install the left engine mount insulator. Refer to INSULATOR, ENGINE MOUNT, LEFT, REMOVAL AND INSTALLATION  .
3. Connect the negative battery cable.
4. Remove the support and lower the vehicle.