Removal And Installation

WARNING: This page is about a different variant/trim than selected.

REMOVAL

Remove the Radio Frequency Hub (RFH). Refer to MODULE, RADIO FREQUENCY (RF HUB), REMOVAL AND INSTALLATION .

Courtesy of CHRYSLER GROUP, LLC

1 - Fasteners

2 - Remote Start Antenna (RSA)
Carefully remove the fasteners that secure the Remote Start Antenna (RSA) to the headliner bracket.
Remove the RSA from the headliner.

INSTALLATION

Position the RSA for installation.
Carefully install the fasteners that secure the RSA to the headliner bracket and tighten securely.
Install the Radio Frequency Hub (RFH). Refer to MODULE, RADIO FREQUENCY (RF HUB), REMOVAL AND INSTALLATION .