Right Catalytic CONVERTOR Heat Shield

REMOVAL 

1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
2. Remove the right catalytic convertor assembly. Refer to CONVERTER, CATALYTIC, REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

   1 - Heat Shield Nuts

   2 - Heat Shield

   3 - Heat Shield Bolt

3. Remove the heat shield bolt, nuts and the right catalytic convertor heat shield.

INSTALLATION 

1. Install the right catalytic convertor heat shield. Tighten the bolt and nuts to the proper torque specification. Refer to TORQUE SPECIFICATIONS  .
2. Install the right catalytic convertor assembly. Refer to CONVERTER, CATALYTIC, REMOVAL AND INSTALLATION .
3. Remove the support and lower the vehicle.
4. Start the engine and inspect for exhaust leaks. Repair the exhaust leaks as necessary.