Left Catalytic CONVERTOR Heat Shield

REMOVAL 

1. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
2. Remove the side belly pan. Refer to BELLY PAN, REMOVAL AND INSTALLATION .
3. Remove the left catalytic convertor assembly. Refer to CONVERTER, CATALYTIC, REMOVAL AND INSTALLATION .

   Courtesy of CHRYSLER GROUP, LLC

   1 - Heat Shield

   2 - Heat Shield Nuts (Plastic)

   3 - Heat Shield Nuts (Steel)

4. Remove the catalytic converter heat shield nuts and the catalytic convertor heat shield.

INSTALLATION 

1. Install the catalytic convertor heat shield and tighten the catalytic convertor heat shield nuts to the proper torque specification. Refer to TORQUE SPECIFICATIONS  .
2. Install the left catalytic convertor assembly. Refer to CONVERTER, CATALYTIC, REMOVAL AND INSTALLATION .
3. Install the side belly pan. Refer to BELLY PAN, REMOVAL AND INSTALLATION .
4. Remove the support and lower the vehicle.
5. Start the engine and inspect for exhaust leaks. Repair the exhaust leaks as necessary.