LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Gladiator Willys, 3.0L Eng VIN M, Part Time T/Case Control >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 3.0L Engine (Service Information) (3 Of 3) >> Fuel System >> Specifications >> Fuel System Pressure - Diesel

Fuel System Pressure - Diesel

The correct fuel pressure from the in-tank electric fuel pump to the high pressure injection pump for this vehicle is 4.5 bar (65.2 psi) and 7.0 bar (101.5 psi). The correct flow rate for the in-tank electric fuel pump is approximately 53 gph (201 lph) at an ambient temperature of 73° F (23° C) and a constant battery voltage of 13 volts DC.