LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Cherokee Latitude, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lamps/Lighting - Exterior (Service Information) >> Standard Procedure >> Standard Procedure - Lamp Alignment >> Headlamp Alignment

Headlamp Alignment

NOTE:

Due to the linear nature of the headlight cutoff, a properly aimed low beam headlight will project the top edge of the high intensity pattern on the alignment screen from the horizontal line to 50 millimeters (2 inches) below the horizontal line for domestic market vehicles, or to 125 millimeters (5 inches) below the horizontal line for export market vehicles. No horizontal (right/left) adjustment is required for this headlight beam pattern in domestic market vehicles. Export market vehicles have a second horizontal (right/left) adjustment screw provided. The high beam pattern will be correct when the low beams are properly aimed.

  1. Turn the headlights ON and select the LOW beams for vehicles in all markets.
    GC0173285Courtesy of CHRYSLER GROUP, LLC
  2. On all vehicles except those with headlight leveling, use a screwdriver to rotate the headlight vertical adjustment screw (2) on the side of the front lamp unit (1) just inboard of the fender.
scientia non olet · About LEMON Manuals