LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2021 >> Cherokee Latitude Plus, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Hood >> Hinge, Hood >> Removal

Hinge, Hood: Removal

GC0155572Courtesy of CHRYSLER GROUP, LLC
  1. Support the hood on the side that requires hinge replacement and disconnect the support cylinder from the upper hinge. Refer to PROP, GAS, REMOVAL .
  2. Mark the hinge (1) attachment locations at the hood with a grease pencil or other suitable device to aid installation.
  3. Remove the cowl cover. Refer to COVER, COWL PANEL, REMOVAL .
  4. Remove the fasteners (2) attaching the hood to the hinge (1).
    GC0155965Courtesy of CHRYSLER GROUP, LLC
  5. Mark the hinge (2) attachment locations at the load beam inner with a grease pencil or other suitable device to aid installation.
  6. Remove the fasteners (1) attaching the hood hinge (2) to the load beam inner and remove the hinge from vehicle.
scientia non olet · About LEMON Manuals