LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2020 >> Grand Cherokee Trackhawk >> Repair and Diagnosis >> Electrical >> Gauges >> Body - Interior & Exterior >> Exterior >> Shield, Splash, Wheelhouse >> Removal >> Removal - Front

Removal - Front

GC0146878Courtesy of CHRYSLER GROUP, LLC
  1. Remove the wheel and tire assembly.
  2. Remove the front fender flare. Refer to MOLDING, FRONT WHEEL OPENING, REMOVAL  .
  3. Drill out and remove the plastic rivets that secure the sill cladding to the wheel liner (2).
  4. Remove the fasteners (4) securing the liner to the front fascia (5).
  5. Working around the perimeter, remove push-pins securing the liner to the fender (1).
  6. Remove remaining push-pins and remove the wheel liner from the vehicle.
scientia non olet · About LEMON Manuals