Diagnostic Test
WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
CHECK FOR AN ACTIVE DTC
- With the scan tool, read Radio DTCs and record on the repair order.
- With the scan tool, erase the DTC.
- Wait 60 seconds.
- Turn the Radio on.
- With the scan tool, read DTCs.
Is the DTC active?
Yes
- Replace the Radio in accordance with the Service Information.
Refer to RADIO, REMOVAL AND INSTALLATION .
No
- Test complete.
- Replace the Radio in accordance with the Service Information.