Diagnostic Test
WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
VERIFY OPERATION OF THE BUTTON
- With the scan tool, read DTCs and record on repair order.
- With the scan tool, erase DTCs.
- Press and release all the Radio hard and soft keys three times.
- Wait 60 seconds.
- With the scan tool, read DTCs.
Did the DTC return?
Yes
- Replace the Radio in accordance with the Service Information.
Refer to RADIO, REMOVAL AND INSTALLATION .
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
No
- Test complete.
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
- Replace the Radio in accordance with the Service Information.