Set Condition
WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
- Pressure Control Solenoids:
- A short to ground failure is detected if the ASIC indicates a short to ground failure.
- A short to battery or open circuit failure is detected if the ASIC indicates a short to battery or open circuit failure.
- Shift Solenoids:
- A short to ground or open circuit failure is detected if the ratio between the voltage at the Shift Solenoid and the output stages power supply is above a calibrated threshold.
- A short to battery failure is detected if the ratio between the voltage at the Shift Solenoid and the output stages power supply is below a calibrated threshold.