LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1385 (948TE Automatic Transmission - DTCS P0219-00 To P1B13-00) >> DTC Troubleshooting >> P07C0-00-Input/Turbine Shaft Speed Sensor 1 Circuit High >> Theory Of Operation

Theory Of Operation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

The Transmission Control Module (TCM) monitors the Input Speed and Output Speed Sensors for electrical malfunctions. This monitoring is done by comparing the sensor voltage (measured across a shunt resistor) to a high and low signal voltage threshold. If the high or low voltage threshold is exceeded, a DTC is set for the specific sensor.