LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1384 ((Park Assist Module (PAM) - 12 Channel - Electrical Diagnostics)) >> DTC Troubleshooting >> U1930-29-Ignition Working Condition Signal From BCM - Signal Invalid >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
LOSS OF COMMUNICATION FROM THE BCM
INVALID SIGNAL SENT FROM BCM TO THE PAM

Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding. Refer to  PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE  .

scientia non olet · About LEMON Manuals