Diagnostic Test

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FOR AN ACTIVE DTC

Turn the ignition on.
With the scan tool, read PAM DTCs and record on the repair order.
With the scan tool, erase PAM DTCs.
With the scan tool, read PAM DTCs.
Is the DTC active?

Yes
- Replace the Park Assist Module (PAM) in accordance with the Service Information. Refer to MODULE, PARK ASSIST, REMOVAL AND INSTALLATION .
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
No
- Perform the TESTING FOR AN INTERMITTENT CONDITION procedure. Refer to TESTING FOR AN INTERMITTENT CONDITION .