U017E-Lost Communication With SEATBELT Sensor 1
WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
This DTC indicates a communication issue has occurred between the Sending control module (Drivers Door Module - DDM) and the Reporting control module(s) that set this fault.
NOTE:
Treat this DTC as a MISSING MESSAGE DTC when performing the COMMUNICATION DIAGNOSTIC PROCEDURE.
The COMMUNICATION DIAGNOSTIC PROCEDURE MUST be performed before replacing any component(s) or module(s). Perform the COMMUNICATION DIAGNOSTIC PROCEDURE. Refer to COMMUNICATION DIAGNOSTIC PROCEDURE .