When Monitored

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

This diagnostic runs when the following conditions are met:

With the engine running.
Start up coolant temperature between -10°C (14°F) and 60°C (149°F).
Ambient temperature above -10°C (14°F) and 50°C (122°F).
Engine speed above 1200 rpm.
Average vehicle speed greater than 16 km/h (10 mph) until coolant temperature reaches 85°C.
- The pass/fail determination point is reached when the coolant temp model reaches 88°C (190.4°F).