LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1376 ((Electronic Steering Lock (ESL) Module - Electrical Diagnostics)) >> DTC Troubleshooting >> U0426-31-MINICRYPT Error - No Signal

U0426-31-MINICRYPT Error - No Signal

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

This DTC indicates a communication issue has occurred between the Sending  control module (Body Control Module - BCM) and the Reporting  control module(s) that set this fault.

NOTE:

Treat this DTC as a MISSING MESSAGE  DTC when performing the COMMUNICATION DIAGNOSTIC PROCEDURE.

The COMMUNICATION DIAGNOSTIC PROCEDURE MUST  be performed before replacing any component(s) or module(s). Perform the COMMUNICATION DIAGNOSTIC PROCEDURE. Refer to COMMUNICATION DIAGNOSTIC PROCEDURE .