LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1375 ((Dual Clutch Selector Module (DCSM) - Electrical Diagnostics)) >> DTC Troubleshooting >> U1950-00-BCM Command (From Body Control Module) Message CRC Or Message Counter Fault

U1950-00-BCM Command (From Body Control Module) Message CRC Or Message Counter Fault

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The Scan Tool may display the description name of this Diagnostic Trouble Code differently with the following below:

U1950-00-BCM COMMAND MESSAGE CRC OR MESSAGE COUNTER FAULT - SIGNAL INVALID

The COMMUNICATION DIAGNOSTIC PROCEDURE MUST  be performed before replacing any component(s) or module(s). Perform the COMMUNICATION DIAGNOSTIC PROCEDURE. Refer to COMMUNICATION DIAGNOSTIC PROCEDURE .

NOTE:

Treat this DTC as a IMPLAUSIBLE SIGNAL  DTC when performing the COMMUNICATION DIAGNOSTIC PROCEDURE.

scientia non olet · About LEMON Manuals