U1930-86-CSWM (Comfort Seat Wheel Module) Operational Mode Status - Signal Invalid

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

This DTC indicates a communication issue has occurred between the Sending control module (Body Control Module (BCM) and the Reporting control module(s) that set this fault.

The COMMUNICATION DIAGNOSTIC PROCEDURE MUST be performed before replacing any component(s) or module(s). Perform the COMMUNICATION DIAGNOSTIC PROCEDURE. Refer to COMMUNICATION DIAGNOSTIC PROCEDURE .