Theory Of Operation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

The Comfort Seat Wheel Module (CSWM) controls the Heated Steering Wheel (HSW) heating element temperature by using a Pulse Width Modulation (PWM) of the current to the element. The CSWM uses a high side driver to adjust the PWM duty cycle to maintain a desired temperature. The wiring to the HSW heating element is routed from the CSWM through the Steering Column Control Module (SCCM) and Clockspring.

The HSW temperature is monitored by a temperature sensor embedded in the steering wheel. The HSW temperature sensor is wired to the Heated Steering Wheel Switch. The Heated Steering Wheel Switch sends the temperature value over a Local Interface Network (LIN) Bus to the SCCM. The SCCM then sends the temperature value to the Body Control Module (BCM) over a Local Interface Network (LIN) Bus and then from the BCM to the CSWM over the Controller Area Network (CAN) Bus.