Diagnostic Test

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FOR AN ACTIVE DTC

With the scan tool, read Radio DTCs and record on the repair order.
With the scan tool, erase DTCs.
Start the engine and allow the engine to reach normal operating temperature.
If the vehicle has been in the hot sunlight or extreme cold, move the vehicle indoors and open the doors to allow the inside temperature to stabilize.
The Radio should operate below 80°C (175°F).
With the scan tool, read Radio DTCs.
Did the DTC return?

Yes
- Turn the Radio off and allow the unit to cool.
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
No
- Test Complete.