LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1363 (2.4L Emissions Control) >> Crankcase Ventilation >> Valve, Positive Crankcase Ventilation (PCV) >> Removal And Installation >> 2.4L MULTIAIR >> Removal

2.4L MULTIAIR: Removal

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
    GC0187021Courtesy of CHRYSLER GROUP, LLC
  2. Remove the hose (2) from the Positive Crankcase Ventilation (PCV) valve (1).
    GC0187080Courtesy of CHRYSLER GROUP, LLC
  3. Use a screwdriver (2) to engage the internal ribs of the PCV valve (1).
    GC0186432Courtesy of CHRYSLER GROUP, LLC
  4. Rotate the PCV valve (1) counterclockwise and remove the PCV valve from the cylinder head cover.
    GC0187119Courtesy of CHRYSLER GROUP, LLC
  5. The PVC valve O-ring seal can be reused if not damaged.
scientia non olet · About LEMON Manuals