U1706-64-BSM - Brake System Module -Node - Signal Plausibility Failure
WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
This DTC indicates a communication issue has occurred between the Sending control module (Antilock Brake System - ABS) and the Reporting control module(s) that set this fault.
NOTE:
Treat this DTC as a IMPLAUSIBLE SIGNAL DTC when performing the COMMUNICATION DIAGNOSTIC PROCEDURE.
The COMMUNICATION DIAGNOSTIC PROCEDURE MUST be performed before replacing any component(s) or module(s). Perform the COMMUNICATION DIAGNOSTIC PROCEDURE. Refer to COMMUNICATION DIAGNOSTIC PROCEDURE .