LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1362 (Occupant Restraint Controller (Orc) - DTCS B0124-1B To U1932-86) >> DTC Troubleshooting >> B0126-54-Calibration Missing-Missing Calibration >> Theory Of Operation

Theory Of Operation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

When powered, during flash programming of the Occupant Restraint Controller (ORC) experienced an interruption of the programming procedure due to a software or hardware failure. The repair of this fault centers on verifying the ORC completed successfully the flash programming process completely. The flash programming process is asked to run again in the diagnostics written to possibly clear the internal hardware or software failure.

scientia non olet · About LEMON Manuals