LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1362 (Occupant Restraint Controller (Orc) - DTCS B0124-1B To U1932-86) >> DTC Troubleshooting >> B0124-1B Front Passenger Anchor PRETENSIONER-Circuit Resistance Above Threshold >> Theory Of Operation

Theory Of Operation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

When powered, the Occupant Restraint Controller (ORC) sends a test current to the squibs to verify the integrity of the squib and wiring. These circuits are maintained in a "floating" configuration at the ORC (connected to neither power nor ground) as protection against inadvertent deployment. Use of the Supplemental Restraints System (special tool #8443A, SRS Load Tool) in the tests below substitutes a suspect squib with a known good component. The use of the ORC Adapter provides a test point as well as a method for opening the shorting bar connections within the ORC harness connector.

scientia non olet · About LEMON Manuals