LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1362 (Occupant Restraint Controller (Orc) - DTCS B0124-1B To U1932-86) >> DTC Troubleshooting >> B0124-1B Front Passenger Anchor PRETENSIONER-Circuit Resistance Above Threshold >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

The Occupant Restraint Controller (ORC) monitors the resistance of the Passenger Seat Belt Tensioner circuits. The ORC will set this DTC if it detects high resistance on the Passenger Seat Belt Tensioner circuits for 2.6 seconds. The DTC will change from active to stored when the ORC monitoring shows the open circuit fault is gone for 2.6 seconds. The multifunction indicator lamp (MIL) will set in the instrument cluster.

scientia non olet · About LEMON Manuals