LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1361 (Occupant Restraint Controller (Orc) - DTCS B0106-11 To B0124-1A) >> DTC Troubleshooting >> B0123-1A Front Driver Anchor PRETENSIONER-Circuit Resistance Below Threshold >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

The Occupant Restraint Controller (ORC) monitors the resistance of the Driver Seat Belt Tensioner (Retractor) circuits. The ORC will set this DTC if it detects low resistance on the Driver Seat Belt Tensioner (Retractor) circuits for 2.6 seconds. The DTC will change from active to stored when the ORC monitoring shows the shorted together fault is gone for 2.6 seconds. The multifunction indicator lamp (MIL) will set in the instrument cluster.

scientia non olet · About LEMON Manuals