LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1361 (Occupant Restraint Controller (Orc) - DTCS B0106-11 To B0124-1A) >> DTC Troubleshooting >> B0123-11 Front Driver Anchor PRETENSIONER-Circuit Short To Ground >> Set Condition

Set Condition

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

The Occupant Restraint Controller (ORC) monitors the resistance of the Driver Seat Belt Retractor circuits. The ORC will set this DTC if it detects low resistance on the Driver Seat Belt Retractor circuits for 2.6 seconds. The DTC will change from active to stored when the ORC monitoring shows the short to ground circuit fault is gone for 2.6 seconds. The multifunction indicator lamp (MIL) will set in the instrument cluster.

scientia non olet · About LEMON Manuals