LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1350 (Wiper System & Washer System (Service Information)) >> Switch, MULTIFUNCTION, Right >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The Steering Column Control Module (SCCM) for this vehicle includes the wiper (right) multifunction switch, the lighting (left) multifunction switch and the clockspring. The two multifunction switches and the clockspring are inseparable from the SCCM and are serviced only as a unit. If any function or feature of either multifunction switch or the clockspring is ineffective or damaged, or if the Driver AirBag (DAB) has been deployed, the entire SCCM must be replaced. Refer to MODULE, STEERING COLUMN CONTROL (SCCM), REMOVAL AND INSTALLATION .