Rear Washer Nozzle: Removal
WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the spoiler from the outside of the liftgate. Refer to SPOILER, REMOVAL .
- Working from the back of the spoiler, disconnect the washer hose and check valve from the nipple of the rear washer nozzle (1a).
- Using a trim stick or another suitable wide flat-bladed tool, compress the latch features (1b) that secure the rear washer nozzle in the mounting hole of the spoiler panel far enough to release the nozzle.
- Remove the rear washer nozzle from the mounting hole of the spoiler panel.