Rear Washer Nozzle: Installation
WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
- Position the rear washer nozzle (1a) to the mounting hole of the liftgate spoiler panel. Be certain that the nozzle orifice is oriented toward the liftgate glass.
- Using hand pressure, press firmly and evenly on the rear washer nozzle until the latch features (1b) snap into place behind the mounting hole of the liftgate spoiler panel.
- Connect the check valve and rear washer supply hose unit to the nipple of the rear washer nozzle.
- Install the spoiler onto the outside of the liftgate. Refer to SPOILER, INSTALLATION .