Front Washer Nozzle: Removal
WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the retainers (1) that secure the silencer pad (2b) to the inner hood panel reinforcement.
- Disengage the tabs (2a) of the silencer pad from the slots in the inner hood panel reinforcement and remove the silencer pad.
- From the underside of the inner hood panel reinforcement disconnect the supply hose (1b) from the nipple of the front washer nozzle (2).
- Release the integral latch features of the front washer nozzle and push the nozzle out through the mounting hole toward the outside of the hood panel.