Rear Wiper Blade: Removal
WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
- Lift the rear wiper arm to raise the wiper blade and element from the liftgate glass.
- To remove the wiper blade (1) from the wiper arm (3), grasp the end of the blade nearest to the motor output shaft, then rotate it out from under the arm far enough to access the blade pivot pin (2) engaged within the latch features (4) from under the end of the arm.
- Using a small screwdriver or another suitable tool, carefully pry the wiper blade pivot pin to unsnap it from the latch features of the wiper arm.
- Gently lower the tip of the wiper arm to the glass.