LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1350 (Wiper System & Washer System (Service Information)) >> Blade, Wiper >> Description And Operation >> Front Wiper Blade >> Description

Front Wiper Blade: Description

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
GC0158863Courtesy of CHRYSLER GROUP, LLC

This vehicle is equipped with frameless (also known as flat or beam) front wiper blades. Each front wiper blade is secured by an integral latching pivot block (3) to the receptacle formation on the tip of each front wiper arm, and rests on the glass near the base of the windshield when the wipers are not in operation. The wiper blade consists of the following components:

The front wiper blades for this vehicle are unequal length and are not interchangeable. The right blade is 50 centimeters (19.69 inches) long and the left blade is 55 centimeters (21.65 inches) long. They have non-replaceable rubber elements (squeegees). The wiper blades cannot be adjusted or repaired. If ineffective, worn or damaged the entire wiper blade unit must be replaced.