LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1349 (Body Control Module (BCM) - DTCS U1411-09 To U1990-83) >> DTC Troubleshooting >> U1953-83-Message Brake1 Plausibility Error (Counter)-Value Of Signal Protection Calculation Incorrect

U1953-83-Message Brake1 Plausibility Error (Counter)-Value Of Signal Protection Calculation Incorrect

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

This DTC indicates a communication issue has occurred between the Sending  control module (Antilock Brake System (ABS) Module) and the Reporting  control module(s) that set this fault.

The COMMUNICATION DIAGNOSTIC PROCEDURE MUST  be performed before replacing any component(s) or module(s). Perform the COMMUNICATION DIAGNOSTIC PROCEDURE. Refer to COMMUNICATION DIAGNOSTIC PROCEDURE .