LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1349 (Body Control Module (BCM) - DTCS U1411-09 To U1990-83) >> DTC Troubleshooting >> U1930-86-Ecu OPERATIONALMODESTATUS Internal Signal-Signal Invalid

U1930-86-Ecu OPERATIONALMODESTATUS Internal Signal-Signal Invalid

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The Scan Tool may display the description name of this Diagnostic Trouble Code differently with the following below:

U1930-86-ECU OPERATIONALMODESTS-SIGNAL INVALID

The COMMUNICATION DIAGNOSTIC PROCEDURE MUST  be performed before replacing any component(s) or module(s). Perform the COMMUNICATION DIAGNOSTIC PROCEDURE. Refer to COMMUNICATION DIAGNOSTIC PROCEDURE .

For a complete wiring diagram, refer to appropriate SYSTEM WIRING DIAGRAMS article  .

scientia non olet · About LEMON Manuals