LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1348 ((Drivetrain Control Module (DTCM) - Electrical Diagnostics)) >> DTC Troubleshooting >> U199B-87-Lost Communication With BSM Can Messages Brake6 Or Brake7 Or Brake8 Or Status_EPB Missing From Brake System Module - Missing Message

U199B-87-Lost Communication With BSM Can Messages Brake6 Or Brake7 Or Brake8 Or Status_EPB Missing From Brake System Module - Missing Message

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

The Scan Tool may display the description name of this Diagnostic Trouble Code differently with the following below:

BRAKE6 OR BRAKE7 OR BRAKE8 OR STATUS EPB MESSAGE MISSING - MISSING MESSAGE

The COMMUNICATION DIAGNOSTIC PROCEDURE MUST  be performed before replacing any component(s) or module(s). Perform the COMMUNICATION DIAGNOSTIC PROCEDURE. Refer to COMMUNICATION DIAGNOSTIC PROCEDURE .

NOTE:

This DTC indicates a communication issue has occurred between the Sending  control module (ABS) and the Reporting  control module(s) that set this fault.