LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1342 ((Forward Facing Camera Module (FFCM) - Electrical Diagnostics)) >> DTC Troubleshooting >> C14AA-64-Sensor Adjustment Required - Signal Plausibility Failure >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

CHECK IF THE FORWARD FACING CAMERA IS INSTALLED PROPERLY 

  1. Check if the Forward Facing Camera is installed properly. Refer to MODULE, FORWARD FACING CAMERA (FFCM), REMOVAL AND INSTALLATION .
  2. With the scan tool, perform the Forward Facing Camera - Calibration Procedure. Refer to MODULE, FORWARD FACING CAMERA (FFCM), MODULE PROGRAMMING .
  3. Perform the FORWARD FACING CAMERA VERIFICATION TEST. Refer to FORWARD FACING CAMERA VERIFICATION TEST  .

    Did the DTC return?

    Yes 

    No 

    • Test complete.