LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1341 ((Electronic Power Steering (EPS) Module - Electrical Diagnostics)) >> DTC Troubleshooting >> C1018-68-VIN Message From Body Control Module (BCM) Is Missing - Event Information >> Possible Causes

Possible Causes

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes
POWERTRAIN CONTROL MODULE (PCM) VIN NOT PROGRAMMED
BODY CONTROL MODULE (BCM) PROXI CONFIGURATION ALIGNMENT NOT PERFORMED
ELECTRIC POWER STEERING (EPS) MODULE

Always perform the PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE before proceeding. Refer to  PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE  .

scientia non olet · About LEMON Manuals