LEMON Manuals
: Even more car manuals for everyone
Home
>>
Jeep
>>
2019
>>
Renegade High Altitude, 4WD
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 1341 ((Electronic Power Steering (EPS) Module - Electrical Diagnostics))
>>
DTC Troubleshooting
>>
C1005-86-Status Lamp Failure BCM - Signal Invalid
>>
Set Condition
Set Condition
WARNING:
This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
Body Control Module (BCM) detects an EPS status lamp failure, this DTC will set.