LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1335 (2.4L Ignition System) >> Switch, Ignition >> Diagnosis And Testing >> Steering Lock Does Not Engage With Key Removed

Steering Lock Does Not Engage With Key Removed

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
STEP OPERATION TO BE CARRIED OUT OK (NO FAULTS DETECTED) FAULT DETECTED OPERATION
1 IGNITION LOCK CYLINDER CONDITION CHECK 
  • With the key at ON, extract the lock cylinder from the steering lock device and check the condition of the steering lock shank.
 End of diagnosis. Steering lock shank broken or damaged. Replace the ignition lock cylinder.
scientia non olet · About LEMON Manuals