LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1334 (1.3L Ignition System) >> Coil, Ignition >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the ignition coils into the correct position as marked previously and tighten the ignition coil bolts to the proper specification. Refer to TORQUE SPECIFICATIONS  .
  2. Connect and lock the wire harness connectors to the ignition coils.
  3. Install the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL AND INSTALLATION .
  4. Install the engine cover. Refer to COVER, ENGINE, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals