LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1333 (1.3L Cooling System) >> Engine >> Sensor, Coolant Temperature >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Refit the engine coolant temperature sensor and engage the retaining clip using round-nosed pliers.
  2. Install the thermostat. Refer to THERMOSTAT, INSTALLATION  .
scientia non olet · About LEMON Manuals