LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1333 (1.3L Cooling System) >> Accessory Drive >> Belt, Serpentine >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the belly pan. Refer to BELLY PAN, REMOVAL .
    GC0190267Courtesy of CHRYSLER GROUP, LLC
  2. Using a suitable tool, rotate the bolt (1a) on the belt tensioner (1b) to release the tension, and remove the serpentine belt (1c).
scientia non olet · About LEMON Manuals