LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1333 (1.3L Cooling System) >> Accessory Drive >> Belt, Serpentine >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the serpentine belt and pulleys for damage.
  2. Rotate the belt tensioner and install the serpentine belt.
  3. Install the belly pan. Refer to BELLY PAN, INSTALLATION .
scientia non olet · About LEMON Manuals