LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1332 (2.4L Cooling System) >> Accessory Drive >> Belt, Serpentine >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the right front tire and wheel assembly. Refer to REMOVAL .
  2. Partially remove the front half of the right front wheelhouse splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, REMOVAL .
    GC0153811Courtesy of CHRYSLER GROUP, LLC
  3. Using a suitable removal tool, rotate belt tensioner (7) to release the tension and remove the serpentine belt (5).
scientia non olet · About LEMON Manuals