LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2019 >> Renegade High Altitude, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1323 (Audio/Video/Entertainment/Connectivity (Service Information)) >> Speaker >> Removal And Installation >> Instrument Panel End Speaker >> Removal

Instrument Panel End Speaker: Removal

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
  2. Remove the instrument panel speaker grill.
    GC0154390Courtesy of CHRYSLER GROUP, LLC
  3. Remove the speaker (2) mounting fasteners (1).
    GC0154461Courtesy of CHRYSLER GROUP, LLC
  4. Disconnect the wire harness connector (2) and remove the speaker (1).
scientia non olet · About LEMON Manuals