Diagnostic Test

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FOR AN ACTIVE DTC

With the scan tool, read TBM2 DTCs and record on the repair order.
With the scan tool, erase DTCs.
Turn the ignition off and remove the key from the ignition.
Turn the ignition on, wait one minute.
With the scan tool, read TBM2 DTCs.
Did the DTC return?

Yes
- Replace the TBM2 in accordance with Service Information. Refer to MODULE, GLOBAL TELEMATICS BOX, REMOVAL AND INSTALLATION .
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
No
- Perform the BODY VERIFICATION TEST. Refer to BODY VERIFICATION TEST .
- Test complete.