Blind Spot Sensor

WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

The hardwired circuits between the Blind Spot Monitor (BSM) smart sensors/modules (Left Blind Spot Sensor / LBSS and the Right Blind Spot Sensor / RBSS) may be diagnosed using conventional diagnostic tools and procedures. Refer to the appropriate wiring information. The wiring information includes wiring diagrams, details of wire harness routing and retention, connector pin-out information and location views for the various wire harness connectors, splices and grounds. For proper wire repair, and connector repair procedures, refer to STANDARD PROCEDURE , REMOVAL and INSTALLATION .

However, conventional diagnostic methods will not prove conclusive in the diagnosis of the smart sensors/modules or the electronic controls and communication between modules and other devices that provide some features of the BSM system. The most reliable, efficient and accurate means to diagnose the smart sensors/modules or the electronic controls and communication related to LBSS or RBSS operation requires the use of a diagnostic scan tool.