Fog Lamp Alignment
WARNING: This page is about a different car, the 2020 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
A properly aimed front fog lamp will project a pattern on the alignment screen 100 millimeters (4 inches) below the fog lamp centerline and straight ahead of the lamp for domestic market vehicles.
- Turn the fog lamps ON.
- Open the access cover located in the front of the wheel well splash shield.
- Using a screwdriver, rotate the vertical adjustment screw (2) on each lamp to adjust the fog lamp (1) beam height as required.
- Close the access cover located in the front of the wheel well splash shield.